Members AcouGuitar Posted February 9, 2009 Members Share Posted February 9, 2009 I'm try to run my pedalboard to 2 amps (1) Marshall JTM30 (2)Fender Hot Rod Deluxe both with effect loops however I run half my pedalboard thru the loop and the the other half thru the front end. It works great with one or the other but how would be able to run both amps and have my effects be available on both? Link to comment Share on other sites More sharing options...
Members greenweenie Posted February 9, 2009 Members Share Posted February 9, 2009 I'm not sure about this but I think this will work: Guitar > front of amp pedalboard with stereo pedal at end or splitter > Fender and Marshall then a) Fender effects loop send > effects in loop > return of Marshall; send of Marshall > return of Fender b) Fender effects loop send > effects in loop with stereo pedal at end > return of Marshall and return of Fender c) Marshall effects loop send > effects in loop > return of Fender; send of Fender > return of Marshall b) Marshall effects loop send > effects in loop with stereo pedal at end > return of Fender and return of Marshall Link to comment Share on other sites More sharing options...
Members BP90 Posted February 9, 2009 Members Share Posted February 9, 2009 maybe a couple a/b/y boxes? Link to comment Share on other sites More sharing options...
Members AcouGuitar Posted February 9, 2009 Author Members Share Posted February 9, 2009 Thanks so much!!! It's worth a try! wish I could use a a/b box of sort but not really sure whats out there to give me what I want! Link to comment Share on other sites More sharing options...
Members AcouGuitar Posted February 9, 2009 Author Members Share Posted February 9, 2009 does anyone know of a a/b/y box that this could be done with or any other advice? Link to comment Share on other sites More sharing options...
Members greenweenie Posted February 9, 2009 Members Share Posted February 9, 2009 A/B/Y boxes can combine both amps simultaneously. Morley, Lehle, Radial come to mind. But DIY A/B/Ys can be made very easily. Link to comment Share on other sites More sharing options...
Members AcouGuitar Posted February 9, 2009 Author Members Share Posted February 9, 2009 hmmmm I'm going to try your backline first, hope that does it. I can run my CS9 and my DD-3 at the end to spilt the signal. If that doesn't work, I'm not really sure how an a/b/y box will work with a loop and front end signal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.