Members Mikoo69 Posted February 24, 2010 Members Share Posted February 24, 2010 I am wondering if there are any pedals in my chain that should not be run off the same isolated power outlet of my pedalpower 2+. i am trying to power all of them with one PP2+ and have plenty of Y splitter cables. obviously some of them wont power on together because of mA requirement i believe but i am just wondering if there are any pedals i should avoid powering off the same isolated output. Rig is as follows: Guitar> Passive A/B box (B goes out to a tuner for silent tuning) > LoopMaster Dual Loop Pedal > Loop A (Black Cat OD/Fuzz > Analogman KOT)Loop B (Analogman Sunface > Fuzz Factory > Fridgebuzzz Land of the Rising Fuzz > Beano Boost) - this lets me keep fuzzes and Ods in separate loops for easy switching/stacking. output of looper > this1ismyne buffer > Sweetsound Mojo Vibe > Boss DM-2 > Boss DD-2 > Boss DD-6 > Demeter Tremulator. therefore i am powering 14 pedals (including the looper and tuner) off the PP2+. Anything to be weary about? Link to comment Share on other sites More sharing options...
Members Mind_Riot89 Posted February 24, 2010 Members Share Posted February 24, 2010 Keep the delays and the vibe isolated as they have high mA consumption. The only other thing is the fuzzes but I'm too knowledgeable about those so I'll leave those to someone else. Link to comment Share on other sites More sharing options...
Members Mikoo69 Posted February 24, 2010 Author Members Share Posted February 24, 2010 it seems i get away with running DD-6 and buffer together, and DM-2 and DD-2 together...im just wondering if thats okay for noise/grounding/functionality of the pedals Link to comment Share on other sites More sharing options...
Members Mind_Riot89 Posted February 24, 2010 Members Share Posted February 24, 2010 It's all up to your ears. If you don't hear any noise, don't change. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.