Members Rxtele Posted April 18, 2012 Members Share Posted April 18, 2012 So here's what I've got so far:Boss Compressor>TS9 tube screamer>Boss Fender Bassman>Boss Tremolo>Pearl Analog Delay was thinking of putting the Bassman first in the chain, then putting the Pearl Analog Delay in front of the Tremolo Your thoughts???? thanks:cry: Link to comment Share on other sites More sharing options...
Members macadood Posted April 18, 2012 Members Share Posted April 18, 2012 i'd personally keep it as it is probably. maybe swap the bassman with teh TS9. but nothing wrong with mixing it up, depending on what sounds you want to get. Link to comment Share on other sites More sharing options...
Members Rxtele Posted April 19, 2012 Author Members Share Posted April 19, 2012 I discovered that the Compressor doesn't seem to be compatable with the Fender Bassman pedal. the Bassman, when used by itself between the guitar and the amp input, can approximate the "swirly" sound of a bassman through a solid state amp. But put in a chain of pedals and run it through the effects loop and it just turns to {censored} before your eyes. OK, so more useless trivia Link to comment Share on other sites More sharing options...
Members imbuedblue Posted April 19, 2012 Members Share Posted April 19, 2012 Boss Compressor > TS9 tube screamer > Pearl Analog Delay > Boss Tremolo > Boss Fender Bassman OR Boss Compressor > TS9 tube screamer > Boss Tremolo > Pearl Analog Delay > Boss Fender Bassman Link to comment Share on other sites More sharing options...
Members captions87 Posted April 19, 2012 Members Share Posted April 19, 2012 Boss Compressor > TS9 tube screamer > Pearl Analog Delay > Boss Tremolo > Boss Fender BassmanORBoss Compressor > TS9 tube screamer > Boss Tremolo > Pearl Analog Delay > Boss Fender Bassman This could work if you want to get more of the effect of all those pedals going into a bassman. Link to comment Share on other sites More sharing options...
Members daysofspeed Posted April 20, 2012 Members Share Posted April 20, 2012 What amp do you have? Your overdrive / gain pedals arent likely to sound good through the effects loop anyway. Try running all your pedals through your amps input. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.