Members Elessar [Sly] Posted November 27, 2012 Members Share Posted November 27, 2012 I plugged my modulations into the send and return of my Laney IRT60H for a jam, and was unable to get any sound out of it. Pedals, cables, power, etc all work fine except when you step on them whilest they are in the loop. Can anyone help with this? Link to comment Share on other sites More sharing options...
Members Lanefair Posted November 27, 2012 Members Share Posted November 27, 2012 Silly question but, they're not plugged in back to front are they? Or are you using a true bypass positive ground effect that is shorting everything? Link to comment Share on other sites More sharing options...
Members Elessar [Sly] Posted November 27, 2012 Author Members Share Posted November 27, 2012 Originally Posted by Lanefair Silly question but, they're not plugged in back to front are they? Or are you using a true bypass positive ground effect that is shorting everything? They are plugged in correctly. This is what is in the loop: Dano phaer >> Wilson effects Deluxe Haze >> CE-2>> DL-4>> DD-6 Link to comment Share on other sites More sharing options...
Members Lanefair Posted November 27, 2012 Members Share Posted November 27, 2012 Just try everything one at a time. Also try just a cable in the loop. Link to comment Share on other sites More sharing options...
Members Elessar [Sly] Posted November 27, 2012 Author Members Share Posted November 27, 2012 Yeah I will have to do that I think. The amp has a switch for 0db or -10db, would switching this to a particular setting help? Link to comment Share on other sites More sharing options...
Members Lanefair Posted November 27, 2012 Members Share Posted November 27, 2012 Either way it shouldn't mute anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.