Members Megadeth Man Posted October 9, 2007 Members Share Posted October 9, 2007 From the VHT 2150 manual. Link to comment Share on other sites More sharing options...
Members tommythelurker Posted October 9, 2007 Members Share Posted October 9, 2007 As a load box it will sound like ass because it's nothing but a big ass resistor. As a line out with a speaker still attached to the amp giving it a reactive load it will work fine. Link to comment Share on other sites More sharing options...
Members Negative K3 fan Posted October 9, 2007 Members Share Posted October 9, 2007 As a load box it will sound like ass because it's nothing but a big ass resistor. As a line out with a speaker still attached to the amp giving it a reactive load it will work fine. +1 Link to comment Share on other sites More sharing options...
Members jimbojamz Posted October 9, 2007 Members Share Posted October 9, 2007 As a load box it will sound like ass because it's nothing but a big ass resistor. As a line out with a speaker still attached to the amp giving it a reactive load it will work fine. woild r1 be your speaker cab? Link to comment Share on other sites More sharing options...
Members tommythelurker Posted October 9, 2007 Members Share Posted October 9, 2007 woild r1 be your speaker cab? Essentially yes. R1 is there to be the load for your amp if no cab is connected. You could replace the switch and R1 with a jack to connect your speaker (a "speaker through"), or you could just remove them altogether and use the second output of the amp (if it has one). Electrically it's the same difference, you end up with the line out voltage divider in parallel with the speaker. Link to comment Share on other sites More sharing options...
Members jimbojamz Posted October 9, 2007 Members Share Posted October 9, 2007 Essentially yes. R1 is there to be the load for your amp if no cab is connected.You could replace the switch and R1 with a jack to connect your speaker (a "speaker through"), or you could just remove them altogether and use the second output of the amp (if it has one). Electrically it's the same difference, you end up with the line out voltage divider in parallel with the speaker. thank ye! Link to comment Share on other sites More sharing options...
Members Megadeth Man Posted October 9, 2007 Author Members Share Posted October 9, 2007 As a load box it will sound like ass because it's nothing but a big ass resistor. As a line out with a speaker still attached to the amp giving it a reactive load it will work fine. Thanks for the info, man. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.