Members Erim Posted February 13, 2009 Members Share Posted February 13, 2009 So the "high" input jack was uninstalled at some point from my MIG100. When I went to look at reconnecting it, I found no wires inside to solder to it. I looked at the schematic and it looks like there are 3 wires going to each input. In mine all the visible wires attached to the "low" input jack. I'm terribly confused and could use some help if possible. Below is a link to the schematic and below that are pics of the input jack itself. http://www.freeinfosociety.com/electronics/schematics/audio/sovtekmig100h.pdf Link to comment Share on other sites More sharing options...
Members PlayaFndr Posted February 13, 2009 Members Share Posted February 13, 2009 Looks like the wires and associated components were removed altogether. You are going to have to redo that section from scratch. Link to comment Share on other sites More sharing options...
Members knucklefux Posted February 13, 2009 Members Share Posted February 13, 2009 nice fingernails:poke: Link to comment Share on other sites More sharing options...
Members knucklefux Posted February 13, 2009 Members Share Posted February 13, 2009 seriously, though...is there a wire connected to V1 pin 7? that should be the first gain stage for the high input. Link to comment Share on other sites More sharing options...
Members ericwylde Posted February 13, 2009 Members Share Posted February 13, 2009 the MIG100 is different from the MIG100Hnot the same schematic Link to comment Share on other sites More sharing options...
Members Erim Posted February 13, 2009 Author Members Share Posted February 13, 2009 nice fingernails:poke: Not mine, friend held amp for me to take pic Link to comment Share on other sites More sharing options...
Members knucklefux Posted February 13, 2009 Members Share Posted February 13, 2009 hopefully said friend has tits:o Link to comment Share on other sites More sharing options...
Members Erim Posted February 13, 2009 Author Members Share Posted February 13, 2009 hopefully said friend has tits:o Uhh, yeah she does. Is my wife's best friend. I'm wondering why the hell someone uninstalled the high output stuff though.. doesn't make any sense. Link to comment Share on other sites More sharing options...
Members NaptownChris Posted February 14, 2009 Members Share Posted February 14, 2009 Humm. Too bad mine's at the practice space. I'd pop the chassis open and take a pic of it to show you what it should look like. Unfortunately, it's an hour away... If you manage to find the actual MIG 100 schematic (and not the 100h), let me know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.