Members the Seed Posted May 27, 2007 Members Share Posted May 27, 2007 Thought maybe I should repost this here???? I'd like to get some recomendations for TRS 1/4 connectors.reliability...ease of soldering etc... Thanks!John Link to comment Share on other sites More sharing options...
Members Meanderthal Posted May 27, 2007 Members Share Posted May 27, 2007 Switchcraft or Neutrik, either way yer good to go. Both reliable, solder easily enough. Is that all ya wanted to know? Link to comment Share on other sites More sharing options...
Members the Seed Posted May 27, 2007 Author Members Share Posted May 27, 2007 I figured between one or the other then I noticed there are a variety of TRS connectors to choose from under those 2 names and rI remember reading that some are easier to solder then others....plastic melting, space etc...??So I was wandering?I am about to order about 20 to connect to my Control Room cables coming from the tracking room. Link to comment Share on other sites More sharing options...
Members Prog Posted May 27, 2007 Members Share Posted May 27, 2007 Switchcraft never made a bad TRS. I have some that must be 15 years old. A few are hand-me-downs. They still work fine. Link to comment Share on other sites More sharing options...
Members the Seed Posted May 27, 2007 Author Members Share Posted May 27, 2007 right on guys!! Link to comment Share on other sites More sharing options...
Members TimmyP Posted May 28, 2007 Members Share Posted May 28, 2007 Although it's easier to prep and solder the sleeve connection on the Switchcraft, I much prefer the Neutrik, mainly owing to the strain relief. The only thing I don't like is the tapered barrel, as you can't wrap labels or tape around them and make it look good. Get them from Fullcompass in lots of 10 for the best proce I have found. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.