Members fishfartz Posted February 8, 2006 Members Share Posted February 8, 2006 alright guys. i am wiring my LP back up with 2 buckers. i just want them wired each to a volume control - and no tone controls. i just know how these pups sound and dont use the tone controls with them. so im wiring it to a 3 way toggle, where i get: up=neck alone middle= both pups down= bridge alone OK, i have an extra toggle switch that just has up/down on the guitar, how can I wire it to use the killswitch? i know I can use the toggle as a killswitch by turning 1 pups volume off - but i want an extra switch dedicated to the trick and its sitting in the old tone-pot slot. anyway - any help would be greatly appreciated Link to comment Share on other sites More sharing options...
Members Verne Andru Posted February 8, 2006 Members Share Posted February 8, 2006 Intercept either the hot or ground wire just before it goes to the output jack. Link to comment Share on other sites More sharing options...
Members fishfartz Posted February 8, 2006 Author Members Share Posted February 8, 2006 thanks Verne i appreciate it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.