Members Tricyclerocks Posted March 7, 2009 Members Share Posted March 7, 2009 Hello Forum,I'm interested in some ideas of what would be the best mics (reasonably priced) that you pro use to mic a choir. I'm envisioning four mics for the 20 to 40 person multi-staged choir, and one near field mic (SM58?) for solos and a SM58 for the director and vocal instructor who plays piano (and does all the funerals and wedding ceremonies solo). I threw an Alesis NanoCompressor in the insert on her mic in order to help with her dynamic range in a 1500 person cathedral, which seems to work well to smooth things out in a challenging environment. We have a Mackie 1402 mixer that runs into the church system. Any thoughts and experiences are greatly appreciated! Link to comment Share on other sites More sharing options...
Members Ed Dixon Posted March 7, 2009 Members Share Posted March 7, 2009 This one gets complicated fast and can be quite location based. The first question is whether this is for recording or sound reinforcement? Its sounds like it Link to comment Share on other sites More sharing options...
Members BillESC Posted March 7, 2009 Members Share Posted March 7, 2009 Audio Technica's U853RW choir mics work very well either hanging or on tall boom stands. As noted, proximity to the target is important. The offer a 110 degree polar pick up pattern. Link to comment Share on other sites More sharing options...
Members jimmymio Posted March 8, 2009 Members Share Posted March 8, 2009 I've had good luck using AT choir mics in similar application. I know Audix and Shure make similar products.I wonder if boundary mics would work here?JP Link to comment Share on other sites More sharing options...
Members Tricyclerocks Posted March 8, 2009 Author Members Share Posted March 8, 2009 Thanks for the input!Yes, it's a live application. The church is huge with a massive ceiling, but sometimes they have mass downstairs, which obviously is smaller and shorter ceiling.I'm not sure what kind of mics they have now, other than they are condenser, have built in goose necks, and use the smaller mic clips.They sound like someone is singing thru a telephone and you have to get real close just to pick anything up, and they distort real easy.I have the Notre Dame Folk Choir out performing this weekend. I'm going with 4 SM58s on the 20 singers. I know they're not ideal because you should be real close but they sound much nicer. I also have the soloists using a 58, inserted Nanocompressor. Again, I realize it's not pro quality, but it makes a difference.After this weekend I might be able to convince the priest, choir director, and the principal we should invest in better mics, as we have 2 school-wide singing concerts every year and the choir sings at least once a weekend.I looked into the A.T.'s.Are there any others?What are the industry standards?I really appreciate all your help on this.Also, other than compressing a soloist, are there any other outboard gear you can use in a cathedral setting?Thanks,Mike Link to comment Share on other sites More sharing options...
Members Ed Dixon Posted March 8, 2009 Members Share Posted March 8, 2009 There are lots of firms that make good quality small condensor mics that can be hung. However you first want to be sure you know how many you need and exactly where you want them. Moving them after the fact is usually difficult. If you go with hanging mics, you can initially test using a clothes line approach. Its ugly, but allows for testing different positions with ease. Run a clothes line like wire across teh stage over the choir. Then run the hanging mics down the line and drop where needed. That way you can easily adjust position with ease. Once you find the number and position, you will know where to hang them more permanently. Ed Link to comment Share on other sites More sharing options...
Members Tricyclerocks Posted March 9, 2009 Author Members Share Posted March 9, 2009 Hi,The mics they have are CAD MG115s. I googled them and they go for over $100 each, so I guess they're not complete trash. Unfortunately, there's no way I can hang any mics.....the ceiling is way to high and ornate and the purchase will have to be able to be moved to the lower church as well as the school auditorium. The mics just don't pick anything up unless you sing right into them, and then it distorts quick and sounds like someone's singing thru a cell phone.The SM58 worked great for the soloists (with a tad of compression inserted on that one channel and an eq after the mixer before the amp). Just wondering if there was any great goose neck mics that can pick up a 40 person choir without cranking the trims and channels that can cause feedback too inadvertently or easily. Thanks,Mike Link to comment Share on other sites More sharing options...
Members Ed Dixon Posted March 9, 2009 Members Share Posted March 9, 2009 Your best choice then may be good quality condensor mics on boom stands. Then you can get them a bit closer and also move them from hall to hall. Unless you have an unusual configuration, I dont see how you will avoid have to have multiple mics to get any volume before feedback. How many rows in the main choir? One option is 2-3 mics per row. Ed Link to comment Share on other sites More sharing options...
Members agedhorse Posted March 9, 2009 Members Share Posted March 9, 2009 The MG-115 is not a terribly uniform response versus position polar pattern. The small diaphram requires directionality compromises. It's a good mic though, but without the windscreen the pressure from your breath will move the diaphram all over the place. There should be sufficient gain before feedback, I hope you are not trying to use stage monitors with far field condenser mics are you? One trick we use to improve choir mic performance is to get the choir to arrange themselves deeper than they are wide. This means we can use fewer mics to coverthe same size choir and fewer mics means better coherency of the sound and better gain before feedback. It also hel;ps the choir hear themselves a little better. Also, I like to remind them to project, sing out to the back row of the audience. This makes a huge difference and costs absolutely nothing. It's usally the single best thing you can do. Link to comment Share on other sites More sharing options...
Members srp72ee Posted March 9, 2009 Members Share Posted March 9, 2009 If the choir members are looking down at their music in a folder of some sort, it somewhat defeats the purpose of hanging mics from the ceiling. If the choir knows the material and all eyes are on the director, hanging mics work because your projecting to the mic. Andy's point of having them "sing to the back row" works wonders too. Link to comment Share on other sites More sharing options...
Members Ed Dixon Posted March 9, 2009 Members Share Posted March 9, 2009 Hanging mics are usually angled appropriately. Choir members need to learn to look forward and project their voice. Singing to their shoes is not an effective approach... Ed Link to comment Share on other sites More sharing options...
Members Tricyclerocks Posted March 10, 2009 Author Members Share Posted March 10, 2009 Thank you to everyone for all your help and wisdom. No, we are not using any monitors. I ripped everything apart and went thru the entire gain staging process (I inherited this job/equipment). If you say the CAD mics are decent, I believe you. It could be the way it was set up before. I was able to get a decent sound with the SM58s (a much fuller sound, but the gain was cranked). The CADs are definitely better at picking up the entire choir. There's no way I can hang them though. Is there any "tricks" (with signal processing possibly)? Would using a compressor on them do anything useful? I inserted an EQ after the Mackie which helped clean things up, but that was with the SM58s.Thanks again for everyone's help and wisdom!Mike Link to comment Share on other sites More sharing options...
Members Shaster Posted March 10, 2009 Members Share Posted March 10, 2009 I've wound up volunteering my services for quite a number of school productions over the years - choirs, musicals, and so on. One of my best tricks (for myself anyway) is to use decent mics and as few as possible. I usually can't hang any mics, so I wind up placing a couple on studio booms, or if possible using the X/Y configuration on one boom. I've had success with the Audio Technica AT4041's, the Rode NT5's, and the Rode NT4 (stereo X/Y). I also like the AKG C1000 for choir (maybe too much top end for some). Watch the "3 to 1" rule to avoid comb filtering (google if desired). As a matter of fact, there's a small chance that some of the problems with your hanging mics could be frequency cancellation due to comb filtering. Good luck. Link to comment Share on other sites More sharing options...
Members agedhorse Posted March 10, 2009 Members Share Posted March 10, 2009 I've wound up volunteering my services for quite a number of school productions over the years - choirs, musicals, and so on.One of my best tricks (for myself anyway) is to use decent mics and as few as possible. I usually can't hang any mics, so I wind up placing a couple on studio booms, or if possible using the X/Y configuration on one boom.I've had success with the Audio Technica AT4041's, the Rode NT5's, and the Rode NT4 (stereo X/Y). I also like the AKG C1000 for choir (maybe too much top end for some).Watch the "3 to 1" rule to avoid comb filtering (google if desired). As a matter of fact, there's a small chance that some of the problems with your hanging mics could be frequency cancellation due to comb filtering.Good luck. Yes, I find that generally a simple XY pair will get me the best (or most uniform) results with the least chances for unexpected problems. Link to comment Share on other sites More sharing options...
Members Tricyclerocks Posted March 11, 2009 Author Members Share Posted March 11, 2009 I haven't tried the X Y technique yet, so thanks so much for that idea! Would you use just one pair, or would you do more than one?I'm also kind of fascinated with these C1000s. How much better are they that the CADs I have to work with now? Plus I have to convince the priest to belly up the $400 for one pair (I'd like 2 pair I think since we do productions downstairs as well as in the gym-atorium) who doesn't like any mic-ing, even though the main church seats over a thousand people and the ceiling is something like 40' high at certain points. Acoustically, it's pretty nice......but it reverbs mostly just the low end of the spectrum making the singers text very hard to hear. I'm not a real religious guy, but I'd think that the this type choral music is "lyric driven". Link to comment Share on other sites More sharing options...
Members Shaster Posted March 13, 2009 Members Share Posted March 13, 2009 I haven't tried the X Y technique yet, so thanks so much for that idea! Would you use just one pair, or would you do more than one?I'm also kind of fascinated with these C1000s. How much better are they that the CADs I have to work with now? Plus I have to convince the priest to belly up the $400 for one pair (I'd like 2 pair I think since we do productions downstairs as well as in the gym-atorium) Is a Ferrari better than a Jeep, guess it depends on the application. I can only tell you what has worked for me. I believe one of the original points of using the XY technique, or the ORTF (Office de Radiodiffusion Television Fran Link to comment Share on other sites More sharing options...
Members agedhorse Posted March 13, 2009 Members Share Posted March 13, 2009 IMO, the C-1000's will work better for you. It's a flatter mic due to the larger capsule and housing geometry. I will try very hard to keep the number of mics down to as few as possible, even if it may mean sacrificing coverage a little. It's a tradeoff and in most (but not all) cases coverage isn't the most important issue, GBF id generally more of a challange in many spaces. Spaced omnis isn't usually a viable option. Link to comment Share on other sites More sharing options...
Members Dogoth Posted March 14, 2009 Members Share Posted March 14, 2009 My recommendation would be SD cardioid condensers on booms. Agedhorses idea of depth rather than width is also good (also a choir that is stretched out wide can't hear each other as well (hence the typical close knit semi circle)). If you can, use XY technique (It makes for a LOT less phase cancellation problems (which can make for GBF problems as well)). If you MUST use more mics remember the 3 to 1 rule (and remember your thumb is always the ruler): "When using multiple mics make sure the mics are at least 3 times farther apart than they are from their source". This will help in reducing phase problems (as long as all thing are equal I.E. source volume, mic type, input gain structure etc.....). Off topic: I haven't been able to post from my workplace for the last few weeks (although I could log on and read (very frustrating)). It looks like the problem is solved (the IT natzies have gone away (I hope they don't read this)). I have some catching up to do. Link to comment Share on other sites More sharing options...
Members Shaster Posted March 14, 2009 Members Share Posted March 14, 2009 I'm also kind of fascinated with these C1000s. How much better are they that the CADs I have to work with now? In trying to hide my own bias, I think I chickened out on an answer. I believe that the C1000's would be better than your CADs. I really don't like the tiny hanging mics - haven't had much luck compared to a small diaphragm condenser mic (sometimes called pencil condensers). JRBLE brought up a valid point IMO, whatever you decide do yourself a favor and get cardioid condensers. You really don't want omni mics for your purposes. Agedhorse has brought up yet another important issue; sacrificing coverage for better GBF. In fact getting better GBF could also mean moving your FOH further from your mics (only if it makes sense), or arranging choir members for better results. BTW how is your front end, okay, decent? Link to comment Share on other sites More sharing options...
Members Ed Dixon Posted March 14, 2009 Members Share Posted March 14, 2009 Agedhorse has brought up yet another important issue; sacrificing coverage for better GBF. In fact getting better GBF could also mean moving your FOH further from your mics (only if it makes sense), or arranging choir members for better results. In most church settings to deal with GBF, moving anything associated with FOH is not feasible. Beyond getting members to sing louder, you can move mics or use different mics. The other choices are mixer based using EQ and whatever other aids might be available. For most settings, the choir is in the back area, which as least gives you some distance separation. The other challenge is that for some events, the choir may sing from a different location, so some means to deal with that may also need to be considered. Ed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.