Jump to content

flat earth

Members
  • Posts

    4,960
  • Joined

  • Last visited

flat earth's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Fit Monomachine MK2/Machinedrum MK2 / Analogue 4 / Rytm / Octatrack. £30.99 + Postage
  2. Long time no chat Monsieur Rock of the Christian variety! No, no Volca's yet. Been holding backon the beats, but this Snare fix has made the decision even harder. Its very fiddly to perform. I do wonder if a 'Pro' or at least extended version of the Beats may follow. So I will wait a little longer. How you doing? This place seems like a graveyard these days. Shame.
  3. Thought I'd post this here for anyone who doesn't frequent GS forum. This really is a fantastic mod, and totally changes my opinion of the Volca Beats.
  4. BTW, if anyone wants CR2032 battery holders, I have an almost unlimited supply (I work in computers so see alot of dead motherboards etc) and can easily de-solder them out. Feel free to PM me, and i will send you one/some (providing you are fairly local)
  5. 1) Model of Synth: Yamaha TX7 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Will require CR2032 wth solder legs attached, careful de-soldering of old battery and re-soldering in of replacement. (make sure you have the polarity right) Battery location: Pic from: http://www.geocities.com/diffused_light/stuff/TX7.jpg
  6. 1) Model of Synth: Yamaha TX802 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Will require CR2032 wth solder legs attached, careful de-soldering of old battery and re-soldering in of replacement. (make sure you have the polarity right) (Actual solder joints can be accessed from underneath mainboard by removing units main bottom panel) Battery location: Pic from: http://hajo.kessener.net/wp-content/posts/yamaha-tx802/tx802-inside.jpg
  7. 1) Model of Synth: Roland D10 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Standard 'slip in/slip out' CR2032 Battery holder. Battery location: Pic from: http://ericschreiber.com/wp-content/uploads/2008/06/roland_d10_innards.jpg
  8. Sir Flat is on a mission to save the memories of synths everywhere! Excellent work! Thanks
  9. 1) Model of Synth: Korg T3 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Standard 'slip in/slip out' CR2032 Battery holder. Main board accessed from underneath synth. (see pic) Battery location: Pic from: http://hem.fyristorg.com/krall_online/egna/KorgT3/battery_socket.jpg
  10. 1) Model of Synth: Roland JD-800 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Standard 'slip in/slip out' CR2032 Battery holder. Battery location: (at top of main green controller board, under ribbon cable) Pic from: http://www.retrosound.de/JD-inside2.jpg
  11. 1) Model of Synth: Oberheim Matrix 1000 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Standard 'slip in/slip out' CR2032 Battery holder. (although some images show soldered in variety and so would involve 'legged' CR2032 battery and soldering) Battery location: (top right corner) Pic from: http://daquisto.rengo.net/images/2_board.jpg
  12. 1) Model of Synth: Roland JD-990 2) Battery Type: 3v CR2032 3) Any relevant fitting information: Standard 'slip in/slip out' CR2032 Battery holder. Battery location: Pic from: http://img7.imageshack.us/i/rolandjd990006.jpg/
  13. Synth: Roland D-110 Battery Type: 3v CR2032 Fitting/Replacement Information: Lift the battery clip on the holder and gently push out battery, then replace with new one. Battery location: Pic from: http://images.google.co.uk/imgres?imgurl=http://ztup.com/D110batpos.jpg&imgrefurl=http://ztup.com/Roland-D110-Battery-Replacement-Guide.htm&usg=__4U3_0Y7ZZ7elgPMzr6ji-aXusaA=&h=373&w=600&sz=52&hl=en&start=6&um=1&tbnid=DBmul6lSCrYAaM:&tbnh=84&tbnw=135&prev=/images%3Fq%3Droland%2Bu20%2Bbattery%26hl%3Den%26sa%3DN%26um%3D1
  14. Synth: Yamaha SY77 Battery Type: CR2032 Fitting/Replacement Information: Will require CR2032 wth solder legs attached, careful removal of circuit-board and de-soldering of old battery and re-soldering in of replacement. (make sure you have the polarity right) Battery location: Pic from: http://farm3.static.flickr.com/2021/2258900698_d1fdf5cff5.jpg
  15. Synth: Korg 01/W Battery Type: CR2032 Fitting/Replacement Information: Standard CR2032 Battery holder. Battery location: Pic from: http://hajo.kessener.net/wp-content/posts/01w/01w-03.jpg
×
×
  • Create New...