servojohn

Hmmm, I'm not sure where I'd categorize my system, "State of the niche" seems to pop up though. ;>) Here goes: FOH Speakers: Two Sound Physics LabsTrikTraps. Two Servodrive Contrabass subwoofers. Monitor Speakers: Four-12" Coaxial wedges using B&C drivers, also one pair of my original 12x1 wedges, in custom home built cabinets, all bi-amped. FOH drive rack: Yorkville A4.4 amplifier for the subs-stereo mode out from a split input. QSC PLX 3602 for the TrikTraps-stereo mode. 6u R&R 22" deep rack case. FOH processing: Two White 4660 EQs-high pass filter engaged at 100hz for the TrikTraps. Ashly XR1001 crossover and Klark Teknik DN405 parametric EQ on an Aux Fed Sub set up to the amp. Outboard gear sits in two R&R rack cases, a 10u 18" deep, and a 5u 22" deep. There are Furman units in both for lighting and AC. Monitor drive rack: QSC PLX 3602 on low pass duty. Urei 6150 on high pass duty. 6u R&R 22" deep rack case. Monitor processing: Two White 4660 EQ's-I run two monitor mixes on four wedges typically Ashly XR1001 crossover. FX: SPX90. Original version, bought it the first year they came out. Works like a champ, and has the now rider accepted missing power button. ;>) Aphex four channel comp. Crown D75 amp for headphones. Fostex phones. Mixer: A&H GL2200-24-has Calzone case on casters, no dog house. A&H GL2400-16-came with Grundorf black carpeted case. My mic case/toolkit SKB 12 mic case. I do a lot of instrumental acoustic work, so I've got: Three Crown CM700 condensers Two EV 468 N-Dym mics. AKG D112 kick mic EV868 kick mic Two Audix OM7 mics. Crown CM200 condenser w/switch. Senn 604 Four Shure SM58 Four ATM35 clip on lav condensers Two Audix Audix ADX10-FL-P mini clip on condensers for flute Two EV PL80 mics. Bag o'clips. Bag o'adapters, jumpers, genderbenders. Bag o'testers, Sharpies, band aids, vicodin, and misc. Board tape. iPod w/custom cable for patching into stereo channel on mixer. CD walkman player. Ten K&M mic stands w/booms. Whirlwind Medusa 24x6x100' snake, all XLR 2-3 dozen mic cables, various lengths, made from Gepco cable and Neutrik connectors. 300' total Coleman SOOEW 12/3 cable, broken down into: 100' 25' 25' 25' 50' 75' All with Hubbell connectors. Two handtrucks, four dollies, rolls of gaff tape. Coming soon: Two JTR Growler subwoofers, to switch with the Contrabasses as desired. Two Xilica 4x8 processors, to replace the Ashlys. Best regards, John PS, to Orion: I've fixed Proco snakes before, the company was very supportive in sending me replacement parts.