Announcing XPatch-32

32 x 32 DIGITALLY CONTROLLED ANALOGUE AUDIO PATCH BAY
CONTROL ANALOG AUDIO ROUTINGS RIGHT FROM YOUR COMPUTER WITH THE XPATCH-32 PROGRAM
 
CB Electronics introduces XPatch-32, designed by multi-award-winning designer Colin Broad. XPatch-32 is a 32x32 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios. 

The XPatch-32 system is controlled by our XPatch-32 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-32 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2x XLR combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Once configured, XPatch-32 can operate independently of the XPatch-32 program and host computer via the front panel encoder or foot-switch. By switching between snapshots, the foot-switch enables the XPatch-32 to be used as a powerful studio or live performance tool for musicians.

In any studio, the XPatch-32 can make it quick and easy to use your favourite new and legacy hardware effect’s units in your mix. The XPatch-32 is a versatile stand-alone analogue routing/switching system for on-stage boutique instrument processing or amplifier selection.

Specification

• 32x32 CROSSPOINT ROUTING
• 2 INPUT COMBO XLR LINE LEVEL / ¼  INCH JACK DI INPUT 
• 2 OUTPUT FRONT PANEL XLR CONNECTIONS
• FRONT PANEL HEADPHONE MONITORING
• CREATE, STORE & RECALL ROUTINGS
• ANY INPUT CAN CONNECT TO MULTIPLE OUTPUTS
• OSX & WINDOWS COMPATIBLE SOFTWARE
• SOFTWARE & FIRMWARE UPDATES VIA USB
• 8 CHANNELS OF METERING
• +4/-10 dBm LINE LEVEL SELECTION ON EVERY INPUT AND OUTPUT
• I/O ON DB-25 CONNECTORS - TASCAM FORMAT
• UNUSED I/O ARE MUTED TO MINIMISE CROSSTALK
• FOOT-SWITCH INPUT FOR SELECTION OF SNAPSHOTS (PRESETS)
• DESIGNED BY CB ELECTRONICS MULTI-AWARD-WINNING DESIGNER COLIN BROAD
• LOAD AND SAVE PREDEFINED SIGNAL PATHS
• CONNECT A TMC-1 OR TMC-2 TO USE AS A MONITOR CONTROLLER WITH ELECTRONIC PATCH

• XPatch-32 Introductory price £1,800 ex VAT 
• XPatch-32 After Introductory price £2,000 ex VAT

Learn more: www.cbelectronics.co.uk



Contact:
CB ELECTRONICS, 
LODDONSIDE, LANDS END HOUSE BEGGARS HILL ROAD, CHARVIL, BERKS, RG10 0UD, 
UNITED KINGDOM
Phone: +44 (0)118 9320345

• In 1994 Colin Broad was awarded the BKSTS Phil Berkley award for his work in video post production.
• In 1996 Colin Broad (CB Electronics) received the Satis-Fecit for the SR-4.
• In 2010 Colin Broad was made a Fellow of The Association of Motion Picture Sound (amps).
• In 2016 Colin Broad was awarded the Association of Motion Picture Sound Exceptional Contribution Award.