Members Woody_in_MN Posted January 1, 2010 Members Share Posted January 1, 2010 Howdy. I noticed on a Agile AL-2000 I have the binding (or fretboard) is splitting away from the neck. The split is very, very narrow at this point - probably less than a mm, and is about in inch or so in length. The guitar still plays fine - it is really a cosmetic issue. Question: I assume it is possible to re-glue the fretboard to the neck. But what glue should I use? Would Elmer's wood glue be strong enough? Thanks in advance, - w Link to comment Share on other sites More sharing options...
Members JabberyWocky Posted January 1, 2010 Members Share Posted January 1, 2010 titebond. Clamp it. Link to comment Share on other sites More sharing options...
Members Woody_in_MN Posted January 1, 2010 Author Members Share Posted January 1, 2010 ^^^ Can you find titebond at a place like home depot? I have not heard of it. - w Link to comment Share on other sites More sharing options...
Members JabberyWocky Posted January 1, 2010 Members Share Posted January 1, 2010 ^^^Can you find titebond at a place like home depot? I have not heard of it. - w That's like asking if you can find WD-40 at home depot. Link to comment Share on other sites More sharing options...
Members Woody_in_MN Posted January 1, 2010 Author Members Share Posted January 1, 2010 ^^^ OK. Thanks. I'll look for that. - w Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.