Members sonda01 Posted March 6, 2012 Members Share Posted March 6, 2012 So a little while back, i posted in a thread that i was planning on mounting a strat pup onto an acoustic. well... ... I finally did it! And I went all out while doing so: ~ mounted the strat pup ~ wired in a tone pot to control the strat pup ~ mounted an internal "disc" shaped piezo close to the bass side of the bridge ~ mounted a "thumbwheel" pot to blend in the piezo with the strat pup ~ master volume ~ GHS White Bronze strings (fantastic strings btw) ~ endpin jack blablablablablah... here are the pics! here's the strat pup with its homemade mounting gear: i plugged her in, and she sounds fantastic! so many tonal possibilities!! Link to comment Share on other sites More sharing options...
Members profgalen Posted March 6, 2012 Members Share Posted March 6, 2012 Cool. I'd love to hear it. Clips? I think you may end up wanting to run that piezo through some sort of pre-amp. Link to comment Share on other sites More sharing options...
Members sonda01 Posted March 6, 2012 Author Members Share Posted March 6, 2012 i was just going to use a DI Box and run it into the mixer...i would do clips.. if i had any sort of recording gear. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.