Members saxguy123 Posted December 7, 2012 Members Share Posted December 7, 2012 Hello, last year my friend let be borrow his Danoblaster to see if I i could fix it. The problem is the onboard distortion. It doesn't work even with a new battery. So I figured it was a wiring problem. But the problem is I'm not sure where all the wires need to be soldered to. If anyone has a wiring diagram or schematics for this guitar that would be really helpfully. Or if you own one and would be willing to send me pictures of the wiring as a reference that would be helpful too. Thanks Here's a picture of the kind of guitar it is: http://www.google.com/imgres?q=danel...r:39,s:0,i:208 Link to comment Share on other sites More sharing options...
Members Verne Andru Posted December 7, 2012 Members Share Posted December 7, 2012 Dano does really funky wiring. If you ask nicely, the folks over at danguitars.com might be able to help. I believe they have some posted on the site, so look around. You could ask the folks at Danelectro/Evets as well. Link to comment Share on other sites More sharing options...
Members lz4005 Posted December 7, 2012 Members Share Posted December 7, 2012 Before you take anything apart, check the output jack. I believe those guitars used a R/T/S jack to turn on the electronics. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.