Members oinkbanana Posted December 22, 2012 Members Share Posted December 22, 2012 I was brainstorming the way I use my guitar, switches and knobs and wanted to know if this would be possible. (i don't really know how a tone knob works but I assume it's just a resistor) 2 main things: A) I only ever just use the bridge or the neck pickup (never the middle one) B) my tone knob is either always max or min. I have a 5 way pickup selector so i was thinking about just getting rid of the tone knob and hard-wiring the resistor into the pickup selector. disconnecting the middle pickup too. would it be possible to rewire the pickup selector 1 neck tone max 2 neck tone min 3 nothing 4 bridge max 5 bridge min get rid of the tone knob and just put two volume knobs - one for each pickup do they sell 4 way pickup selectors? my tele also came with the switch and the knobs reversed positions (where the knobs are closer to the neck). it's no fuss to reverse that right? Link to comment Share on other sites More sharing options...
Members willyburger Posted December 22, 2012 Members Share Posted December 22, 2012 Yes, this is easily doable. You can use one of these: http://goo.gl/eqjrM Link to comment Share on other sites More sharing options...
Members oinkbanana Posted December 24, 2012 Author Members Share Posted December 24, 2012 thanks.hopefully my tech sees it as simple Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.