Members ZigmundFloyd Posted August 3, 2005 Members Share Posted August 3, 2005 I want to try some rack processors in my effects loop, but everything I look at has balanced in and outs. I've got a line on a DBX compressor which has cannon jacks and 1/4" TRS in and outs. How do I make this work? Will it even work? Thanks Link to comment Share on other sites More sharing options...
Members Subsonicbass Posted August 3, 2005 Members Share Posted August 3, 2005 Your dbx TRS balanced will work just fine with unbalanced TS. Just use regular instrument/patch cable. Link to comment Share on other sites More sharing options...
Members ZigmundFloyd Posted August 3, 2005 Author Members Share Posted August 3, 2005 Ahhh, thank you very much, I've always wondered about this. Link to comment Share on other sites More sharing options...
Members niftydog Posted August 4, 2005 Members Share Posted August 4, 2005 it will work, but you will have half the signal level that you would have if the balanced signal was properly processed due to the fact that you short out one of the balanced signal lines. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.