Members Kyle.E.Woyote Posted July 24, 2008 Members Share Posted July 24, 2008 Sorry if this is a silly question,....long story short, my rig is running through a Peavey Classic 50/50 then to a Marshall 4x12...on the site Radial states place it between Amplifier head and Cabinet. Before I shell out the money for it I wanted to make sure my set up would be no different and will work with this unit. I want to run D.I and mic,(when able to) but I am a little leary to use my GSP-1101 outs direct after a recent show where there were funny clipping issues... Thanks in advance, Kyle Link to comment Share on other sites More sharing options...
Members Spacehog26 Posted July 24, 2008 Members Share Posted July 24, 2008 Weird, never had any problems with my GSP1101's XLR outputs - I use them straight to the board all the time. I do have a weird problem in that one side is ~4dB quieter than the other (and I can see no way to adjust this) but it's easily compensated for at the desk. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.