Members Koa-Dogg Posted January 18, 2009 Members Share Posted January 18, 2009 SOLD Link to comment Share on other sites More sharing options...
Members Koa-Dogg Posted January 25, 2009 Author Members Share Posted January 25, 2009 Bump! Link to comment Share on other sites More sharing options...
Members Kozor17 Posted January 30, 2009 Members Share Posted January 30, 2009 Thats pretty awesome. What size LED's and resistors did you use on the GCX? If its easy enough I might switch out some purples on mine! Thanks and good luck! Link to comment Share on other sites More sharing options...
Members Koa-Dogg Posted January 31, 2009 Author Members Share Posted January 31, 2009 LED's are T-1's (3mm). There are already resistors on the board which are suited fine for most LED's. Just make sure that you orient them properly. There is a drawing on the board that shows how to orient the LED's based on thier shap (The flat side). Good Luck. Scott Link to comment Share on other sites More sharing options...
Members Koa-Dogg Posted February 4, 2009 Author Members Share Posted February 4, 2009 Bump for relisting! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.