Members cmgunn Posted March 27, 2011 Members Share Posted March 27, 2011 I have 2 SCX500's that are having problems. On one fixture, everything works but the lamp. I replaced the dummy load board as it was fried, and the problem was still there. I also tried replacing the thermoswitch. This one when powered on, makes a buzzing noise. The second fixture will not pan or tilt. I tried switching the motors from another known working SCX500 thinking it was them, but still nothing. The pan motor seems to have no power, while the tilt tries to hold one position, both with lightjockey and on stand alone. Any ideas? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.