Members keyh Posted April 6, 2023 Members Share Posted April 6, 2023 For your consideration is an Amplifier Research 200W1000M7A 200 Watts 80-1000MHz Solid State Amplifier The Model 200W1000M7 can be remotely controlled via the Amplifier Research CP2001 or CP3000 controller/interface unit. Both units have a control panel with switches for remote operation of the major amplifier functions. In addition the CP2001 provides a TTL level controller interface connector and the CP3000 has an IEEE 488 interface. The Model 200W1000M7 is a self-contained, air cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 200W1000M7, when used with an RF sweep generator, will provide a minimum of 200 watts of swept power. Specification Power Output, CW Typical: 265 watts Minimum: 200 watts Linear @ 1dB compression: 140 watts minimum Flatness: ± 2.0 dB maximum ± 1.5 dB typical Frequency Response: 80 - 1000 MHz instantaneously Input For Rated Output: 1.0 milliwatt maximum Gain: 53 dB minimum Input Impedance: 50 ohms, VSWR 2.0:1 maximum Output Impedance: 50 ohms, VSWR 2.0:1 typical Harmonic Distortion: Minus 20 dBc maximum at 200 watts Third Order Intercept Point: 62 dBm typical Primary Power: 100/110/120/200/208/220/240 VAC ± 5% 50/60 Hz, single phase 3000 KVA maximum Connectors: RF Input: Type N female on front panel RF Output: Type N female on front panel Remote Control: 25 pin female subminiature D Cooling Options: Forced air (self contained fans) In good working condition, in perfect working order. Housed in a stylish, contemporary equipment rack the Model 200W1000M7 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for higher power amplifiers Asking price: $18,500.00 USD OBO If you are interested kindly send a PM or email keyh503 at gmail dot com Thanks for looking...!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.