If you are in the market and considering investing on this( Boxed Sol-Ark All-In-One Inverter Systems)

[keyh]

Up for sale is a Sol-Ark All-In-One Pre-Wired Inverter Systems, This is completely wrapped up and in perfect boxed condition;

Do you want an all-in-one pre-wired system that includes inverter, charge controller, display with remote monitoring, auto generator start, as well as load center with breakers, rapid shutdown, and WiFi capabilities?  Sol-Ark has the system for you - all pre-wired and all in one box!

A NEW Solar + Storage Solution - have less dependence on the grid! Sol-Ark Pre-Wired Inverter Systems simultaneously manage power to/from Solar, Battery, Grid, Loads, and Generator.  The Sol-Ark is simple to install and can be used in Grid-tied, Off-Grid, or Battery Backup solar applications.  It supports 8000 watts of continuous power for off grid production, and up to 9600 watts of continuous power for on grid.  It is expandable, and can grow as your power needs grow.  On grid PV to AC efficiency is 96 - 96.5% - among the top in the industry - means less solar is needed.

COMPARISON 8K - 12K:
Sol-Ark 8KSol-Ark 12KSolar PV Continuous Power8 kW12 kW*Inverter AC Continuous Power8 kW9.6 kW*Inverter DC Continuous Power8kWOff Grid Inverter AC Peak Power (5s)20kWSystem Idle Power60WAC to DC Charger185APV to Battery Efficiency @ 65%97.5%AC to Battery Efficiency @ 65%96%Battery to AC Efficiency @ 65%95%On Grid PV to AC Efficiency @ CEC96.5%96%Off Grid or Time Of Use Losses @ 65%7%Grid Failure UPS Transfer Time4 msParallel StackingNoYes - up to 63 Phase CapabilityNoYesWarranty5 year (expandable to 10)10 Year

*IMPORTANT NOTE:  SOL-ARK 12K is a combined output - (split between DC Battery and AC Loads/Grid).  The max power to the grid or AC loads is 9.6kW - in conjunction with simultaneously charging the batteries.  So for example - if 9.6kW is going to the grid, an additional 2.4kW of power can be used to charge the batteries.

APPLICATIONS:

Grid-Tied Mode - Sell power back to the Utility to reduce your electric bill*
Meter Zero Mode - Zero your electric bill without adding an additional smart meter
Time-Of-Use Mode - Use solar and batteries to minimize grid power usage when it's most expensive
Smart Load Mode - Use a programmable output for high-power off grid loads or grid Time-of-use loads - to run only when there is optimum solar - use excess PV power when batteries are full
Off Grid applications - battery agnostic
AC Coupling - retrofits to existing grid tie systems
Battery backup applications

*NOTE:  For Net Metering applications, if you have a 200A or greater service, you will need to buy a 200A Current Transformer separately (item code SOLARK200ACT).  The inverters come with 100A CTs that are appropriate for 2/0 wire.  The 200A CTs support 4/0 wire. 

FEATURES:
Grid-Interactive of Off-Grid capability in the same package - can be used with or without energy storage - add batteries down the line
Easy and fast to install - no external components (ie. fuses, breakers, combiner box) - all integrated in one unit
Lightweight - only 75- 77 lbs
Color touch screen
Works with the widest variety of 48V battery chemistries - from lead acid to lithium
Backup power (even use the Grid as backup!) and support for time-of-use optimization
Completely pre-wired system - inverter and charge controller included
Wifi integrated for easy monitoring of system performance
Integrated DC Disconnect, Auto Gen Start, Critical Loads panel
Highly efficient - both on-grid and off-grid
Generator support
Field-upgradeable software with remote support
NEMA 1 enclosure for indoor use only
Fully NEC compliant (N. America) with rapid shutdown
UL1741SA/Rule 21 and 14H Compliant (Grid Sell Only) 

DESIGN CONSIDERATIONS:
For 8K units: 2 MPPT Controllers allow for up to 4 (2 strings per MPPT) 500V strings. This means a max of 9 or 10 60-cell panels in series scaling up to 36 panels (ie. 4 strings of 9 in parallel) - depending on the module Voc.  Max PV input wattage is 11,000W.
For 12K units: Max total string count is 6 (3 per MPPT) 500V strings.  Max PV input wattage is 16,500W.
Damage will occur if the PV temperature compensated Voc (for coldest expected temperature) is over 550V
PV production stops if voltage exceeds 500V (500 Voc Max)
Each pair of strings must be the same voltage per MPPT if both are being used
Example string sizes (for reference ONLY - always calculate max voltage for your specific modules and string sizes):
60 Cell Panels (Min: 5, Max: 10)
72 Cell Panels (Min: 4, Max: 9)
96 Cell Panels (Min: 3, Max 7)
120 Cell Panels (Min: 3, Max 6)

Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed
Model: sol ark 12k
Current Type: AC/DC
Wattage: 10000-14999 W
Charging Mode: MPPT (Maximum Power Point Tracking)
Features: LCD Display, Portable, Wi-Fi Port
Type: Charger/Inverter
System Configuration: Hybrid

Asking USD$6450 or best reasonable offer. 

You can message me via PM or email: keyh503 at gmail dot com

Thanks for looking..!!

[keyh]

Its still available for sale as reasonable offer will be welcomed, Thanks