Jump to content

FS: Line 6 DT25 Head


rslongi

Recommended Posts

  • Members

Gently used Line 6 DT25 head in excellent shape. It has a few tolex nicks/smudges from normal use, but they are very minor and everything functions perfectly. Just selling to move to a more traditional rig...leaving the modeling world (I'll be putting my POD HD500 up for sale soon as well). Specs from the Line 6 website:

 

~~DT25™ Guitar Amplifier Head

• Flexible tube section designed by tube-amp guru Reinhold Bogner

• Instantly reconfigurable per channel

• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)

• Selectable power tube mode (Pentode or Triode)

• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling):

◦ Classic American Clean/Tight NFL

◦ British Crunch/Medium NFL

◦ Class A Chime/Zero NFL

◦ Modern, High-Gain/Resonant NFL

• (1) 12AX7, (2) EL84 tubes

• 4/8/16 ohm speaker outputs

• Series effects loop

• Intuitive, 2-channel design

• Back-lit front panel

• HD amp modeling technology fuels each Voicing’s preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry

• Modeled spring reverb with individual level control per channel

• Cabinet-simulated direct output

• Low Volume Mode provides cranked up tube tone at whisper-quiet volume

• Speaker jack-sensing provides relay driven output transformer protection circuit

• L6 LINK connects DT25 to POD HD for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK™ equipped POD® HD

•DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

 

Asking $475 paypal, plus shipping from 72211. Contact me with any questions, and thanks for looking.

 

1cc8d4ec02c9de99ddf2e80245a967ed.jpeg.74a7fedf4fe0c48d39041234306601c0.jpeg

bbdedca707c7300d51d9a539afd9dbf5.jpeg.9bfc128bd2bde2a694e968701cf94b69.jpeg

4691ec46ed395578cf90ab1c8ce25b4d.jpeg.c355448191b9d7b1089262fc9a08599c.jpeg

Link to comment
Share on other sites

  • 1 year later...
  • Members

I got an Egnater Rebel 30 MKII. I just wanted something simpler...don't need a hundred different sounds, just 2 or 3 basic tones. I run a wah, compressor, additional overdrive in front (just for a different flavor once in a while), and a clean boost and M13 in the loop...gives me everything I need. I'm playing a lot more and tweaking a lot less.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...