Members eric CRAPton Posted April 20, 2004 Members Share Posted April 20, 2004 Anyone here ever tried feeding an analog video signal through a analog(modular) synth then into a TV? I think this is basically what video synths are. Link to comment Share on other sites More sharing options...
Members Jeez Posted April 20, 2004 Members Share Posted April 20, 2004 Nope, but I accidentally connected the video out of my VCR/XBOX (can't remember which) into the audio input on my TV. For a moment there, I could hear perfect Chroma Blue. Forever, Kim. Link to comment Share on other sites More sharing options...
Members Klaseed Posted April 20, 2004 Members Share Posted April 20, 2004 I tried running video from and XL1S through some stomp boxes once (delay and distortion). It didn't work. Nothing happened - no signal at all. I wonder if you could somehow 'pitch-shift 'the signal low enough that it would work with audio gear, or if it's just not the right type of signal at all? Link to comment Share on other sites More sharing options...
Members scubyfan Posted April 20, 2004 Members Share Posted April 20, 2004 What if one turned all the modulation/filtering off and just let the signal pass through? Then one could module the frequencies that are used to carry certain aspects of analog tv, like vertical scan, etc. I could be wrong, but that's in the Khz range, IIRC, so with bandpass filters, one should be able to target just that area. Fun idea, nevertheless! Link to comment Share on other sites More sharing options...
Members cheptronics Posted April 20, 2004 Members Share Posted April 20, 2004 If you have something that plays digital video (like a DV camescope) or some videos on your hard disk, the way to go for setting up an interaction between image and sound is to use Pure Data/GEM or Max/MSP/Jitter btw, 1000th post today ... quite frightening actually Link to comment Share on other sites More sharing options...
Members TheRain Posted April 20, 2004 Members Share Posted April 20, 2004 Originally posted by cheptronics If you have something that plays digital video (like a DV camescope) or some videos on your hard disk, the way to go for setting up an interaction between image and sound is to use Pure Data/GEM or Max/MSP/Jitter btw, 1000th post today ... quite frightening actually Very fitting that you mention pur data and max/msp on your 1000th post Link to comment Share on other sites More sharing options...
Members cheptronics Posted April 20, 2004 Members Share Posted April 20, 2004 Originally posted by TheRain Very fitting that you mention pur data and max/msp on your 1000th post only pure chance here and actually, I use Max/MSP very few, I prefer Pure Data because it's more stable for live concerts (and I have some problems with FFT processes under MSP) also, Pd works on Linux, on which I have a latency of 2.9 ms Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.