Members Magpel Posted August 5, 2009 Members Share Posted August 5, 2009 This is an 8x4x2 Soundcraft Delta 200 frame, currently configured as a 15 channel summing mixer--9 deluxe input strips and 3 stereo strips. Its master section and 2 of the deluxe input strips have been modded by Jim Williams of Audio Upgrades. The Master Section mod is the deluxe $300 mod with the TI THS class A opamps. The two channel strip mods have the MIT caps upgrade--they cost $165 each to mod. All of the non-modded strips work well. I am going to do a rigorous test this week, but i have observed no problems in my routine use. I am asking $1050 for the entire board, plus shipping. Note that I am willing to travel to meet buyers halfway. I am in New York, 90 miles north of NYC. I will consider parting out the Jim Williams-modded components: $300 for the master section. $150 each for the deluxe input strips. Extras that come with the board: --A rough but usable road case --1 extra (umodded) deluxe input strip (tested and working) --The 4 group modules that I took out to make room for more inputs --A backup master section from a Delta Venue, which is fully functional and compatible--I know because I used it while my master section was out with Jim Williams. I would be open to trades involving a Lynx 2 C or an Aurora 8 (Delta + cash obviously). The mixer: The case: The group modules: The spare Soundcraft Venue master section: Link to comment Share on other sites More sharing options...
Members classicalguitar Posted February 26, 2011 Members Share Posted February 26, 2011 looking to buy a soundcraft delta, if yours is still fs please call jerry roberts at615-269-3929 or email at jerryrobertsguitar@gmail.com.I am a classical guitar dealer/player/ builder in nashville.thanks,jerry Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.