Members JuanPabloJr. Posted August 1, 2005 Members Share Posted August 1, 2005 To do this, do you just use an SPST switch before the switch for the A/B? I'm guessing you do, with one pole going to the jack for the tuner, and the other going to the DPDT or 3PDT switch used in the A/B function. Is this correct? Link to comment Share on other sites More sharing options...
Members dot-dot-dot Posted August 1, 2005 Members Share Posted August 1, 2005 A tuner mute is essentially another A/B, so I'd suggest a DPDT or 3PDT if you want an LED. Link to comment Share on other sites More sharing options...
Members Pengrin Posted August 1, 2005 Members Share Posted August 1, 2005 I think you might want to use a DPDT switch before the 3PDT switch. Reason for double pole is so you can ground the amp input when going to tuner. Some amps don't like not having a grounded input when switching to another amp. Also you want double throw so it goes on, stays on, then when you switch it off it stays off. This is all from recollection of something I did years ago so feel free to correct anything. Link to comment Share on other sites More sharing options...
Members JuanPabloJr. Posted August 1, 2005 Author Members Share Posted August 1, 2005 Cool. thanks Link to comment Share on other sites More sharing options...
Members Cruachan Posted August 1, 2005 Members Share Posted August 1, 2005 Use 3PDTs if you want LEDs, but that's the basic design. Link to comment Share on other sites More sharing options...
Members StevieRV Posted August 1, 2005 Members Share Posted August 1, 2005 Originally posted by Cruachan Use 3PDTs if you want LEDs, but that's the basic design. niiiiice you guys are lifesavers.thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.