Members britt-stinker Posted January 26, 2006 Members Share Posted January 26, 2006 Hey everybodyWhat adaptor does the Wiggler use?I have tried seaching all over the net but couldn't really find anything really helpfull. ANd is there anywhere in Europe that sell these? Thanks Link to comment Share on other sites More sharing options...
Members itstartsstoppin Posted January 26, 2006 Members Share Posted January 26, 2006 is it a different power supply then the rest of eh pedals? Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 26, 2006 Author Members Share Posted January 26, 2006 Originally posted by itstartsstoppin is it a different power supply then the rest of eh pedals? I think its AC. But not sure. I only have one more EH effect and it has a transformer in it so it is plugged directly into a wallwart(?). Link to comment Share on other sites More sharing options...
Members b-lance Posted January 27, 2006 Members Share Posted January 27, 2006 if i remember correctly, most of those pedals use the same adaptors. other than that, i really can't help you Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 27, 2006 Author Members Share Posted January 27, 2006 Originally posted by b-lance if i remember correctly, most of those pedals use the same adaptors. other than that, i really can't help you Okay, but thanks anyway. Link to comment Share on other sites More sharing options...
Members andreas Posted January 27, 2006 Members Share Posted January 27, 2006 It's 12 volts AC, 1000mA (or 1A if you like). /Andreas Link to comment Share on other sites More sharing options...
Members hempathy Posted January 27, 2006 Members Share Posted January 27, 2006 Hi Britt, how is the echoflanger? Still the volume drop in true bypass? Link to comment Share on other sites More sharing options...
Members puretube Posted January 27, 2006 Members Share Posted January 27, 2006 Originally posted by andreas It's 12 volts AC, 1000mA (or 1A if you like)./Andreas that`s it! Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 27, 2006 Author Members Share Posted January 27, 2006 Originally posted by hempathy Hi Britt, how is the echoflanger? Still the volume drop in true bypass? It's fine. No I installed the LBP in it to give it a boost. I don't even have to turn the new volume knob more than 1/4 of the turn to get it over unity gain. There are some pops when the pedal hasn't been touched for while, and there is allso a small osc.(or clock whine) in background but I'm alittle lazy right now and need to work with something els for a while. But atleast it works. Thats the most importen thing for me right now. Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 27, 2006 Author Members Share Posted January 27, 2006 Originally posted by andreas It's 12 volts AC, 1000mA (or 1A if you like)./Andreas I was wondering about something. I have never had a AC pedal before - so is it normal that the AC jack doesnt look at all like the normal DC jack? What I mean is - Does all AC Adaptors have the same female AC jack? Anywhere I can get one? Thanks. Link to comment Share on other sites More sharing options...
Members StompboxMan Posted January 27, 2006 Members Share Posted January 27, 2006 Originally posted by britt-stinker Anywhere I can get one? Thanks. Any EH Dealer. Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 27, 2006 Author Members Share Posted January 27, 2006 Originally posted by andreas It's 12 volts AC, 1000mA (or 1A if you like)./Andreas I seached on a store site here in Denmark. They have this from EH:EU12AC-1000 In the description it says it works for the Hot Tubes, Tube Zipper and The Wiggler. But it is 24 volt, DC, 1000 MA. Can this be right? nevermind, I found this at thomann:adaptor Also while we are talking adapters, what adapter does the Digitech pds 2000 need? On the back it says a 10v AC I think. But in a manual I found on the net it says it needs a 9v DC. Can anyone help me with this? Thanks Link to comment Share on other sites More sharing options...
Members 6550HUN Posted January 27, 2006 Members Share Posted January 27, 2006 the wiggler adapter is 20 something volt and the pin is strange,it's a flat sideways pin and a pole. Link to comment Share on other sites More sharing options...
Members puretube Posted January 27, 2006 Members Share Posted January 27, 2006 the thomann adaptor is the correct one!(12V AC @ 1A)with the right plug (DIN). all E-H tube-pedals use it. it`s different, so it won`t be mixed up,and because both wires must be isolated from ground. (that danish store probably got a typo...). Link to comment Share on other sites More sharing options...
Members britt-stinker Posted January 27, 2006 Author Members Share Posted January 27, 2006 Originally posted by puretube the thomann adaptor is the correct one!(12V AC @ 1A)with the right plug (DIN).all E-H tube-pedals use it.it`s different, so it won`t be mixed up,and because both wires must be isolated from ground.(that danish store probably got a typo...). Yeah I'm just going with the one from thomann. Atleast I'm sure it's the right one I get. oh, I cant wait to fire this baby up.Last night I watched the movie from EH about it. But just when that guy began to talk about some of the over the top stuff it did the sound went off so I couldn't hear it.... Now I can't wait to the power supply gets here. I just need to find out if there is still made something that could be used for the PDS 2000. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.