Members 4nkam Posted April 7, 2006 Members Share Posted April 7, 2006 Hey guys, what are you RMC3 settings and what kind of tones are you using it for? I've actually been playing my other wahs for awhile and just recently put the RMC3 back on the board. While it KILLS for vintage blues rock type of stuff, the higher gain side of things seem to be a bit thinner. MJ Link to comment Share on other sites More sharing options...
Members farfignewgon Posted April 7, 2006 Members Share Posted April 7, 2006 I use a modified version of this: LO=5:00MID=7:00SWEEP=2,3,4,7 ONFINE TUNE=9/9Q=12:00VOL=4:00-5:00 Link to comment Share on other sites More sharing options...
Members Teahead Posted April 7, 2006 Members Share Posted April 7, 2006 I use a slightly adjusted version of the RMC1 setting. Like anything eq related, much will depend on your amp, guitar and other stuff. The stock setting and "Hendrix" setting both sound terrible with my gear and almost nothing like Jimi's wah tone. Link to comment Share on other sites More sharing options...
Members jonny guitar Posted April 7, 2006 Members Share Posted April 7, 2006 Originally posted by Teahead The stock setting and "Hendrix" setting both sound terrible with my gear and almost nothing like Jimi's wah tone. Picture Wah is Jimi in a box. Link to comment Share on other sites More sharing options...
Members Teahead Posted April 7, 2006 Members Share Posted April 7, 2006 So I was told, but it didn't work out for me at all, not smooth enough and too much bite. Maybe my set up is just not very wah friendly? I do have treble in spades. It took me a couple of weeks to dial the RMC3 in to taste, even with toe down, the treble is only just more than my bypassed tone, more of a bass cut really. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.