Members shawnc Posted June 27, 2006 Members Share Posted June 27, 2006 I just traded an older empty pine 2x12 cab for a Dunlop reissue Fuzz Face. What I was wondering is how would i wire this up with a 3pdt switch so I can have true bypass with an led. The bottom of the circuit board shows the 6 contact points for the dpdt switch, would I just run wires from those points to the same locations on the 3pdt swicth and then use the other 3 connections for the led? Also has anyone tried drilling the pedal chasis before? Is it really tough to drill through?Cheers Link to comment Share on other sites More sharing options...
Members shawnc Posted June 27, 2006 Author Members Share Posted June 27, 2006 Here's the front of the circuit Link to comment Share on other sites More sharing options...
Members shawnc Posted June 27, 2006 Author Members Share Posted June 27, 2006 Here's the inside of the pedal Link to comment Share on other sites More sharing options...
Members alteredsounds Posted June 27, 2006 Members Share Posted June 27, 2006 This will tell you everything plus more, it's a kinda bible DIY STOMPBOXES Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.