Members Ascension Dream Posted July 26, 2006 Members Share Posted July 26, 2006 I wanted to ask this before I do it and possibly screw up all the electronics..I have the Moog ring mod and murf pedals, and i hate using the wall warts. Is it okay to use a 1-spot on these pedals? I wasnt sure about voltage and all that stuff... im not too electronical. Link to comment Share on other sites More sharing options...
Members varialbender Posted July 26, 2006 Members Share Posted July 26, 2006 The Moog's have reversed polarity for their adaptors.You need to get an adaptor that reverses for you, like the one that comes with the Powerall (not sure if the 1-spot has one, but I doubt it).I think it might get noisier if you power it like this.Your best bet might be to power them individually, or with a Voodoo Labs PP2. Link to comment Share on other sites More sharing options...
Members Ascension Dream Posted July 26, 2006 Author Members Share Posted July 26, 2006 Originally posted by varialbender The Moog's have reversed polarity for their adaptors.You need to get an adaptor that reverses for you, like the one that comes with the Powerall (not sure if the 1-spot has one, but I doubt it).I think it might get noisier if you power it like this.Your best bet might be to power them individually, or with a Voodoo Labs PP2. thanks. Link to comment Share on other sites More sharing options...
Members StratAtak83 Posted July 26, 2006 Members Share Posted July 26, 2006 The powerall may work , but i'd stick to the moog adapters if i were you . Those pedals cost too much . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.