Members rakester Posted January 3, 2007 Members Share Posted January 3, 2007 i have a digitech bad monkey pedal to fix and the 'level' knob on it is not working. I take it that the pot is broken on it so it just needs replacing. what type of pot do i need to fix it? and also it an easy job ?(just a little bit of soldering involved?) . Finally is a new pot cheap? Link to comment Share on other sites More sharing options...
Members rakester Posted January 3, 2007 Author Members Share Posted January 3, 2007 el bumpo Link to comment Share on other sites More sharing options...
Members lostandfoundpdx Posted January 3, 2007 Members Share Posted January 3, 2007 well, you need to take the knob off and make sure its the pot thats the issue... take the pedal apart and see if you can find a value on the pot, and it shouldn't be difficult to replace it. there's lots of online parts distributors. Link to comment Share on other sites More sharing options...
Members rakester Posted January 3, 2007 Author Members Share Posted January 3, 2007 Originally posted by lostandfoundpdx well, you need to take the knob off and make sure its the pot thats the issue... take the pedal apart and see if you can find a value on the pot, and it shouldn't be difficult to replace it. there's lots of online parts distributors. thanks man, will do Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.