Jump to content

Chrous/Flanger that works well with High gain distortion


plecoman

Recommended Posts

  • Members

I have been serching for a chrous pedal that would work well with a highish gain distortion(JCM 800 cranked out). I tried the Boss CE5 and it worked well, but I found it quiet lifeless. Any alternatives yu guys can suggest?

 

Also the Voodoolab chrous I found added too much treble to the signal, and not thick enough.

 

THX!

Link to comment
Share on other sites

  • Members

Were you using the Chorus before the gain or after the gain when you tried these other pedals? The reason I ask is that I was having a hard time getting a decent Chorus sound with the chorus after the distortion, then I bought a CH-1 and just put the thing in front of the amp (in front of the gain), as opposed to in the loop, and it rocks!

Link to comment
Share on other sites

  • Members

I was trying hti infront of the amp. not through the FX loop. The FX loop on the jcm800 2 channel models are so primative that I dare not plug anything into them!

I also use a Klon before the chrous to give the amps a little more drive. So its guitar -> Klon -> CHROUS -> AMP. Any other suggestions?

Link to comment
Share on other sites

  • Members

If you look for a Boss CH-1, run the serial number thru this:

http://www.bossarea.com/serial/sndecoder.aspx

If it comes up as being made before October 2001, then it is analog. These pedals sound GREAT in my opinion, I love mine. The CH-1 gets a bad rap because the newer ones don't sound as good. But there's a reason for that!

Check out this link for more information:

http://www.bossarea.com/loadpage.asp?file=boxes/ch1.xml

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...