Members Steve Howe Posted March 12, 2007 Members Share Posted March 12, 2007 That Third-Hand BS is to expensive Link to comment Share on other sites More sharing options...
Members bt2513 Posted March 12, 2007 Members Share Posted March 12, 2007 Great thread title Sorry, I don't know the answer. Link to comment Share on other sites More sharing options...
Members OrangeLazarus Posted March 12, 2007 Members Share Posted March 12, 2007 just ask a tech at your local guitar shop Link to comment Share on other sites More sharing options...
Members bluehuricane Posted March 12, 2007 Members Share Posted March 12, 2007 the bigger question is, can your wiggler wiggle? Link to comment Share on other sites More sharing options...
Members Fast Frets Posted March 12, 2007 Members Share Posted March 12, 2007 Sounds painful! Link to comment Share on other sites More sharing options...
Members SpectralJulian Posted March 12, 2007 Members Share Posted March 12, 2007 Third Hand is a POS from what I've heard. You can rig an expression pedal for any pot on a pedal. Link to comment Share on other sites More sharing options...
Members Lanefair Posted March 12, 2007 Members Share Posted March 12, 2007 Use a switched jack so that when you plug into it, the pot becomes useless, but when you don't plug into it, the pot works again. Link to comment Share on other sites More sharing options...
Members puretube Posted March 13, 2007 Members Share Posted March 13, 2007 all 3 lugs of the rate-pot (1k, IIRC) need to be switched out, and the connections routed to the external (pedal-)pot, while none of the 3 connections are connected to ground! if one would find a free space to mount an isolated stereo-switch-jack into the chassis, a short stereo-cable from Wiggler to rocker-pedal is probably possible, since the impedance is quite low (1k). the ccw lug ought to be soldered to the screen (shield) of the stereo-cable, and plastic (isolated) plugs should be used to avoid anything grounded touching the circuitry. also in the rocker-pedal, an isolated stereo-jack ought to be used. (or better: a fixed cable) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.