Members EVENTH Posted April 20, 2007 Members Share Posted April 20, 2007 I know this must have been asked before but so what. I've tried and tried to split the board using the manual but it doesn't work! WTF! Can someone help me out with this? Like at what point do you enter the patches you want on the different parts of the board? Link to comment Share on other sites More sharing options...
Members -groovatious- Posted April 20, 2007 Members Share Posted April 20, 2007 You have to set up a performance. Link to comment Share on other sites More sharing options...
Members mrcpro Posted April 20, 2007 Members Share Posted April 20, 2007 ....and make it a Layer. Even though you're doing a split. Don't ask. ..........Actually do ask if you need more help. I'm headed to work, but there are several people in this forum that know how to set up a split on a Roland XP. Link to comment Share on other sites More sharing options...
Members mrcpro Posted April 20, 2007 Members Share Posted April 20, 2007 Uuuhhh what a night. Anyway, if you're still around... Initialize a Performance. It's in Utility. Press edit. Select Layer in key mode and your key range for part one and two. In effects, select PAT (for patch) in effects output and part one for source. Drop the patch whose effects you want to use in the performance in part one and the other in part two. In MIDI, turn local off on all remaining parts. Unless you want them to sound too. That's it. It's pretty simple . Now where's my coffee. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.