Members lawst Posted July 15, 2007 Members Share Posted July 15, 2007 Just installed the radias software for my PC so I've been messin about with the step sequencer. I've created a sequence and set the run mode to loop and the base note to the relevant value. With these settings I'd expect the sequence to start from the same note each time I reapply a key, so for example, if I press E once and release the key immediately the first note of the sequence will play which will be E too since its the base note. However the starting note seems to change on each key press almost as if the run mode is set to step, however it rotates between about 3 different notes but there are 12 in the sequence. Have I missed a setting or something? wtf Link to comment Share on other sites More sharing options...
Members Tony Scharf Posted July 15, 2007 Members Share Posted July 15, 2007 you have to set the keysync on the sequence to 'voice' or 'timbre' (I think). in voice mode, each note will restart the sequence, and in 'timbre' mode the first note will start it, but notes played in quick succession will take the current step (I may be explaining this badly - check the manual). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.