Members enx Posted February 9, 2008 Members Share Posted February 9, 2008 would it be possible to use my Juno-G to control a rack-mount synth AND retain the normal Juno-G settings? the manual says i can control 2 external midi devices(creating an ensemble effect), but could i just control 1 and my Juno-G as i would normally? if not, could i at least play sounds from my Juno(through the synth's song memory or the computer) while i controlled the rack synth? Link to comment Share on other sites More sharing options...
Members enx Posted February 9, 2008 Author Members Share Posted February 9, 2008 control my juno AND 1 control one rack synth possible? Link to comment Share on other sites More sharing options...
Members midi Posted February 9, 2008 Members Share Posted February 9, 2008 Of course! With MIDI you can do anything! Link to comment Share on other sites More sharing options...
Members enx Posted February 9, 2008 Author Members Share Posted February 9, 2008 Of course! With MIDI you can do anything! srsly? i guess i could do one midi channel via usb and the other through midi out anyone ever try this? Link to comment Share on other sites More sharing options...
Members Yoozer Posted February 9, 2008 Members Share Posted February 9, 2008 Juno MIDI out > rack MIDI in.Juno audio out > computerrack audio out > computer Everything you play will be played on both devices as long as the Juno's "local" MIDI is not set to off. If you want to use the Juno's on board knobs/sliders to send MIDI data while the Juno itself should ignore it, you'll have to study the manual for a bit. Link to comment Share on other sites More sharing options...
Members enx Posted February 9, 2008 Author Members Share Posted February 9, 2008 Juno MIDI out > rack MIDI in.Juno audio out > computerrack audio out > computerEverything you play will be played on both devices as long as the Juno's "local" MIDI is not set to off.If you want to use the Juno's on board knobs/sliders to send MIDI data while the Juno itself should ignore it, you'll have to study the manual for a bit. that's what i was thinking, i've read the whole section in the manual, it was just a little confusing (due to my lack of experience regarding MIDI) could i usb connect to a computer and use the rack synth, or just possibly use the Juno alone while using one MIDI channel? Link to comment Share on other sites More sharing options...
Members enx Posted February 9, 2008 Author Members Share Posted February 9, 2008 this will just be a temporary fix (i'm looking for a keytar to go with it) Link to comment Share on other sites More sharing options...
Members enx Posted February 9, 2008 Author Members Share Posted February 9, 2008 Juno MIDI out > rack MIDI in.Juno audio out > computerrack audio out > computerEverything you play will be played on both devices as long as the Juno's "local" MIDI is not set to off.If you want to use the Juno's on board knobs/sliders to send MIDI data while the Juno itself should ignore it, you'll have to study the manual for a bit. sorry for over-bumping my own thread, but do i put both into the mic input on my comp, or the other input (the symbol is a circle with an arrow in it) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.