Members brett567 Posted January 30, 2011 Members Share Posted January 30, 2011 I was getting funny with the LED in a DS-1 and I had to yank somehting out and I cracked the little LED PCB board. Is there a way to fix this and will it work without this?? sorry this must sound so dumb. Thanks Link to comment Share on other sites More sharing options...
Members brett567 Posted January 30, 2011 Author Members Share Posted January 30, 2011 Bump? Link to comment Share on other sites More sharing options...
Members the Dodo Posted January 30, 2011 Members Share Posted January 30, 2011 You can solder the LED directly to the wires hanging on the little PCB. Look at how they are soldered together, de-solder the pcb after screwing it out, solder the LED directly to the wires and give it a little glue. Finally just let it stick where it should be. Nothing massive but it should work out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.