Members kylef Posted October 13, 2012 Members Share Posted October 13, 2012 I've had this pedalboard a while, which uses adhesive felt that can be cut for the pedals.I've changed it around 3 times, but now I'm going to change a lot of my pedals, and would prefer the freedom of moving them every so often.What's the best way? I've saw that Pedalboard Tape Grip, but looks a bit TOO much - I'd prefer to keep my pedals pristine, rather than have the adhesive and glue stick there forever. I'm a little worried Velcro would give me the same problem. Is there something I'm missing that would benefit me? Link to comment Share on other sites More sharing options...
Members Matt Gnarly Posted October 13, 2012 Members Share Posted October 13, 2012 I've heard the 3M Dual Lock won't leave residue, but I don't have any first hand experience. I put masking tape on the back of my pedals that I might flip before putting the velcro on, it works well enough. Link to comment Share on other sites More sharing options...
Members VishNuRoXoUt Posted October 13, 2012 Members Share Posted October 13, 2012 I've seen people use zip ties and even bicycle chain links (whatever those are called). Though I'm not sure if those would wear the paint after a while. I know a dude that bought plain bottom plates of the MXR sized, 1590AA, 125BB, etc. enclosures to replace the bottom plates that came with the pedals, so he could velcro them without ruining the original plate, though that isn't an option for all pedals, like the line 6 stuff and bigger things. Unless you are crafty enough with scrap sheet metal to cut your own plates? Link to comment Share on other sites More sharing options...
Members OnWingsOfLead Posted October 13, 2012 Members Share Posted October 13, 2012 Velcro isn't that bad...and the adhesive can be cleaned off with a bit of WD40 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.