Jump to content

6V6s and 12AT7s in a Valve King?


snakum

Recommended Posts

  • Members

I'm thinking of all the bizarre experiments I can perform on my poor amplifier, and I'm thinking of this ...

 

Replace the Sovtek 6L6s with JJ 6V6s for less wattage, and going to JJ 12AT7 preamp tubes to cut the rather prodigious preamp gain. This way I can turn the 'A-A/B' switch to use primarily one of the 6V6s then crank the power section till the tube(s) start to yield that warm, fat, dynamic grind that only glowing power tubes can give up. And the 12AT7s will knock down some of the preamp gain, leaving a higher percentage of the gain to come from the power section.

 

Whattaya think? Do'able? Any downside that I'm not aware of?

 

Minh

(Always tampering ....)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...