Members ustadjohnny Posted November 15, 2005 Members Share Posted November 15, 2005 Hi all, My first post here I have a Fender Delux 112. It has a clean channel and a drive channel. But when I bought a footsitch, pressing it switches on the reverb and switches it off as well. My question is: Is it possible to 'assign' channel changing to the footswitch? How? Please help! Link to comment Share on other sites More sharing options...
Members Tele The Truth Posted November 15, 2005 Members Share Posted November 15, 2005 The fender footpedal for that amp has one switch for channel select, and one for reverb. It's hooked up to the amp through a 1/4" stereo cable. So if you're using a generic single stomp footswitch, you may have to get a stereo cable end (has two bands on it) to replace the end that's on there now. Just wire it to the second band and you should be good to go. Then you'll be able to use it as a channel select.........but not for reverb. Link to comment Share on other sites More sharing options...
Members ustadjohnny Posted November 16, 2005 Author Members Share Posted November 16, 2005 Thanks Tele. I'm in India and they don't sell Fender accessories here. Will try to get a two band footswithc and give it a try. Thanks again. Link to comment Share on other sites More sharing options...
Members Ian Gilmour Harris Posted July 17, 2020 Members Share Posted July 17, 2020 I have a Fender deluxe 112 and I bought a Marshall generic 2 button stereo jack switch. It changes channels but I lose reverb on the clean channel. Can I alter this switch in any way to disable the reverb switch as I always keep the reverb setting on. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.