Members P.A.T. Posted May 23, 2006 Members Share Posted May 23, 2006 My 100W mosfet amp is broken. It produces a high squeeky sound, so I figured one of the FETs is broken. I took them out and measured, but then they seem OK. Is it a broken FET? How do I find out, can it be measured? And if not: what could it be? I'd appreciate your help... Link to comment Share on other sites More sharing options...
Members redrol Posted May 23, 2006 Members Share Posted May 23, 2006 sounds like maybe a cold solder joint gotta crack it open and check the suckers carefully Link to comment Share on other sites More sharing options...
Members P.A.T. Posted May 23, 2006 Author Members Share Posted May 23, 2006 Originally posted by redrol sounds like maybe a cold solder joint gotta crack it open and check the suckers carefully I allready took 'em out, you mean actually breaking the FET open? Link to comment Share on other sites More sharing options...
Members cousin itt Posted May 23, 2006 Members Share Posted May 23, 2006 Take it to an amp repairer. Link to comment Share on other sites More sharing options...
Members Alumitone Posted May 23, 2006 Members Share Posted May 23, 2006 Originally posted by P.A.T. I allready took 'em out, you mean actually breaking the FET open? No, just the enclosure in which the amp is housed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.