Members angus99 Posted October 14, 2006 Members Share Posted October 14, 2006 i'd really appreciate someone confirming how to connect a 2X12 cab to a Rivera M60 Combo--i don't have a manual and don't want to screw it up. Initially, I want to play through the cab only. I assume you just unplug the combo speaker from the speaker 1 output jack, plug in the 2X12, set the impedence and turn it on. It's a Rivera cab with 2 8-ohm speakers in parallel and it calls for 4 ohms on the input jacks. So, I assume I set the switch on the back of the combo to 4. I know this is a no-brainer for most of you, but it's my first amp and cab & I'm ready to play it a little. Thnx Angus Link to comment Share on other sites More sharing options...
Members angus99 Posted October 15, 2006 Author Members Share Posted October 15, 2006 bump. Link to comment Share on other sites More sharing options...
Members rockapede Posted October 15, 2006 Members Share Posted October 15, 2006 Originally posted by angus99 Initially, I want to play through the cab only. I assume you just unplug the combo speaker from the speaker 1 output jack, plug in the 2X12, set the impedence and turn it on. Correct. Link to comment Share on other sites More sharing options...
Members angus99 Posted October 15, 2006 Author Members Share Posted October 15, 2006 Originally posted by rockapede Correct. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.