Members adamgram Posted September 6, 2007 Members Share Posted September 6, 2007 Randall RM100 HeadRoland FC200 midi foot controller Anyone know how I can use phantom power from the amp to the footswitch? I tried the 7-pin to 5-pin cable but the 5-pin end has a female power plug, as does the footswitch. Can't seem to find an adapter to make that work... has anyone else come across this? Link to comment Share on other sites More sharing options...
Members Oblivion DC Posted September 6, 2007 Members Share Posted September 6, 2007 Is what you're looking for a male power plug on the 5-pin end? I wouldn't worry about an adapter, just find a male end from the wall wart that came with the pedal and use that. Clip off the female end get some shrink tubing and a soldering iron - strip some wires, do some welding, tape the ends and shrink tube the whole thing. It's not hard if you put your mind to it. Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.