Members DarkHorseJ27 Posted December 26, 2009 Members Share Posted December 26, 2009 In the middle of jamming sound stopped coming out of the amp. After much fiddling around, I found the cause to be the input jack. When plugged into the jack in question no sound comes out, nor is there even any sound when plugging in the cable or pulling it out while the amp is on. What is the likely cause of this malfunction, and how do I fix it? Link to comment Share on other sites More sharing options...
Members Blackwater Posted December 26, 2009 Members Share Posted December 26, 2009 What's the amp? Sounds like a solder joint broke... Link to comment Share on other sites More sharing options...
Members madryan Posted December 26, 2009 Members Share Posted December 26, 2009 What's the amp? Sounds like a solder joint broke... Don't you love these threads where you have to bust out your Ouija board to fill in the important details... Link to comment Share on other sites More sharing options...
Members BusterBuster Posted December 26, 2009 Members Share Posted December 26, 2009 Don't you love these threads where you have to bust out your Ouija board to fill in the important details... I didn't have to get my Ouija board out on this one. I'm pretty sure the "Flux Capacitor" came lose or is it loose from the input jack ... Simple fix Link to comment Share on other sites More sharing options...
Members A_saVANT Posted December 26, 2009 Members Share Posted December 26, 2009 Don't you love these threads where you have to bust out your Ouija board to fill in the important details... "B""U""G""E""R"...*puts Ouija board away and runs* Link to comment Share on other sites More sharing options...
Members DarkHorseJ27 Posted December 26, 2009 Author Members Share Posted December 26, 2009 Its a Fender Acoustasonic SFX. Link to comment Share on other sites More sharing options...
Members UsedAS73 Posted December 29, 2009 Members Share Posted December 29, 2009 Try cleaning the input port with some contact cleaner. I clean mine by spraying a .38 cal bore brush (Wally World) with Contact Cleaner (TV Tuner Cleaner at Rat Shack), inserting it into my battery powered drill and reaming out the input port. I then spray the port with a can of compressed air to blow out any loose dust (Hold the can upright so as not to spray liquid!). Give it a try. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.