Members martindcx1e Posted July 14, 2006 Members Share Posted July 14, 2006 i don't understand pcb's. i see the pcb for the dr boogey here. how do i get that? do i have to build that? i've seen pcb's for sale at places like byoc or general guiar gadgets but those are for specifc effects right? what am i missing? Link to comment Share on other sites More sharing options...
Members dot-dot-dot Posted July 14, 2006 Members Share Posted July 14, 2006 A PCB is a Printed Circuit Board. Basically a substrate - usually glass reinforced plastic - with a thin layer of copper over it. You then remove the copper that you don't want left, either by etching it with a corrosive liquid or by routing it off the face of the board. The image there shows what copper should remain on the board. The black is copper, the white is bare board. Link to comment Share on other sites More sharing options...
Members ThomasD Posted July 14, 2006 Members Share Posted July 14, 2006 Go to www.techniks.com for a good explanation of how to make a PCB using press and peel technology. Link to comment Share on other sites More sharing options...
Members martindcx1e Posted July 14, 2006 Author Members Share Posted July 14, 2006 thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.