Jump to content

?'s about midi setup for 5150III 50w


framushead

Recommended Posts

  • Members

Basically.. what effects unit is gonna be best for me and the 5150III 50w . Looking for something that gives the joy of channel switching and with effects loaded during the switching process.

I'm a minimalist when using effects.. delays.. chorus , reverb... phaser/flangers.

Mainly looking at Line 6 products.. I know I would be doing the 4 cable method and a midi cable involved.

POD xt live
POD x3 live
POD HD500

Other than that... is there any others I might have missed? Or pro's or con's to the Line 6 units i posted about.

Link to comment
Share on other sites

  • Members

When you use the M13 in the 4CM, I've experienced it causing ground loops when the loop is switched on. This is with both a 5150III and a JVM. I think the Pods have a ground lift switch if you go that route but the same is achieved by cutting the ground on your leads. Apparently Planet Waves sell cables with no ground at one end for this kind of thing.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...