pickup wiring, can you connect the dots for me?

[BowerR64]

How would i wire this?

 

 

for the switch:

I want all the way to the neck to be the split coil of the front humbucker.

 

#2. to be the neck humbucker (if thats possible)

 

3. middle single coil

 

4. single and bridge humbucker

 

5. the humbucker full on bridge humbucking.

 

Is it possible to wire it like that?

 

I think i need to jump the 0 to the 0 so that all 5 points are together.

[BowerR64]

I decided to just skip the middle pickup since i never use it anyway and i lower it down so its not in the path of my picking.

I wired it like this:


I get some sweet tones from the 1-2 and 3 positions. I didnt think putting the 2 coils together would sound good but it does mix the 2 coils and its whacky.

Position 1 just the front single coil has alot of pick pop and its really brite single coil sounding, in the middle the humbucker in the neck is very warm and dark in position 2 its like a thick single coil. really weird but its cool it works and its not noisy and crappy sounding.