Members slapnutz Posted August 5, 2005 Members Share Posted August 5, 2005 I need to run the auidio from my comp about 50' to a PA system. What kind of wire should I use. I'm worried the signal is to low for this. Do I need to step up the guage? I posted in the Comp forum but theres only 3 people there Link to comment Share on other sites More sharing options...
Members T3 Posted August 6, 2005 Members Share Posted August 6, 2005 you're far better off using a DI. if you need left and right use 2... a 50' unbalanced cable is asking for trouble... Link to comment Share on other sites More sharing options...
Members Zakko Posted August 6, 2005 Members Share Posted August 6, 2005 Originally posted by T3 you're far better off using a DI. if you need left and right use 2...a 50' unbalanced cable is asking for trouble... Thank you! Finally someone said it. Our computer/sampler/MIDI keys guy does this. Mind you it takes two channels on the FOH and you need a stereo mix. There's a couple times where the tech was doing a mono mix and our samples sounded like {censored}. Link to comment Share on other sites More sharing options...
Members slapnutz Posted August 7, 2005 Author Members Share Posted August 7, 2005 Whats a DI ? Link to comment Share on other sites More sharing options...
Members BowerR64 Posted August 7, 2005 Members Share Posted August 7, 2005 Get out your credit card. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.