Members eichaan Posted February 10, 2006 Members Share Posted February 10, 2006 So, I'd like to take out the P-90's in my Agile AL-3000, not for permanent, but just to see what they look like, and to look inside the guitar. I know that I have to remove the inside height adjustment screws, but what then? How hard should I have to pull? Will I need a tool? I don't want to damage anything. Any help from DIYers or luthiers is appreciated! Thanks Link to comment Share on other sites More sharing options...
Members hondro Posted February 10, 2006 Members Share Posted February 10, 2006 1. unscrew 2. pull out Link to comment Share on other sites More sharing options...
Members RomanS Posted February 10, 2006 Members Share Posted February 10, 2006 ...and just don't lose the screws! I used a second-hand P90 off Ebay for building a lap steel, and it came without mounting screws. Took me about a week and trips to 6 or 7 hardware stores before I found one that carries screws long enough to mount the pics, yet slim enough to pass through those tiny holes on the P90. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.