Members prauny Posted September 21, 2007 Members Share Posted September 21, 2007 As in the title, i would like to know a safe way to clean my tung oil finished guitar. Thanks in advance chaps Link to comment Share on other sites More sharing options...
Members Kap'n Posted September 21, 2007 Members Share Posted September 21, 2007 With your tung, of course. I think a rag, and some regular old guitar polish, like the stuff from Martin should work fine. Link to comment Share on other sites More sharing options...
Members larryguitar Posted September 21, 2007 Members Share Posted September 21, 2007 If it's really, really grungy, a bit of 0000 steel wool and another coat of tung oil will make it look like new. HTH Link to comment Share on other sites More sharing options...
Members GarysBlues Posted September 21, 2007 Members Share Posted September 21, 2007 Or just use a damp cloth and if really needed a little bit of soap on the damp cloth. Usually the samp cloth alone will work. Larrys opinion would be right up my alley also. But I use Tung-Oil when needed and apply several coats...just like Larry is talking about. Steel Wool OOOO grade, then apply another coat. I apply my Tung-Oil with a clean cloth very much like I do Stain. Put a even thin coat on this way. But that for another thread. Try the warm water on a damp cloth first though. Link to comment Share on other sites More sharing options...
Members prauny Posted September 21, 2007 Author Members Share Posted September 21, 2007 Thankyou dudes, its just regular monthly cleaning im looking at so a damp cloth sounds good. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.